4K HDR 4:4:4 60Hz HDBaseT3.0 Receiver with USB Device Inputs, Audio De-embed & PoH 100m/328ft over Cat6

$1,080.00

SKU: RX3-100

Introducing the RX3-100, an uncompressed 18G HDBaseT 3.0 receiver that achieves signal transmission up to 100m/328ft at 4K@60Hz via Cat.6A cable. With HDBaseT 3.0, experience USB data transfers of up to 300Mbps, nearly doubling HDBaseT 2.0’s capability of 190Mbps. This heightened capacity supports high-speed connections to 4K webcams, whiteboards, and data drives. The RX3-100 seamlessly pairs with any of WyreStorm’s HDBaseT 3.0 transmitter options, such as the SW-120-TX3 and SW-120-TX3-Ux for a powerful switching extender solution!

          

Technical Specification

AUDIO AND VIDEO

Inputs

1x HDBT In: 8-pin RJ45
3x Type A (Device)
1x RS-232: 3-pin Phoenix

Outputs

1x HDMI Out: 19-pin Type A Female
1x Audio Out 3.5mm (1/8in) TRS Stereo | 1x Line Out 2ch audio over HDBaseT | 1-way from TX

Max Pixel Clock

600MHz

Video Resolution (Max)

1920x1080p @60Hz 12bit
3840×2160 @60Hz 4:4:4 8bit
5120×2160 @30Hz
5120×2160 @60Hz 4:2:0

Supported Standards

DCI | RGB | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100

Audio Formats

HDMI Out: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
Audio Out/De-embed: 2ch Analog/PCM

COMMUNICATION & CONTROL

HDMI

HDMI | HDCP 2.3 | EDID | CEC Pass-through

HDBaseT

HDMI | USB | HDCP 2.3 | EDID | 2-way PoH | Bidirectional RS-232 | CEC

USB

3x Type A (Device) | Maximum uplink speed: 300Mbps

RS-232

1x RS-232: 3-pin Phoenix

POWER

Power Supply

20V DC 3A

Max Power Consumption

10.92W

Features

  • HDBaseT 3.0 Receiver supporting:
    • Uncompressed content up to 4K@60Hz 4:4:4 8bit
    • HDCP 2.3 encryption technology ensuring compatibility with the latest 4K UHD content and sources
    • HD Multichannel audio up to DTS:X and Dolby Atmos via HDMI
  • Compatible with DVI-I and DP++ v1.3 signals from compatible devices
  • USB 2.0 passthrough offering 300Mbps transfer and HID extension
  • Features 3x USB device ports
  • Supports independent lane analog audio pass-through from transmitter to receiver
  • Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
Additional Features

UNCOMPRESSED SIGNAL TRANSMISSION

HDBaseT 3.0 technology is here, sporting the very latest in high-speed transmissions with the increased bandwidth from 10Gbps to an outstanding 18Gbps over a dedicated category cable.

 

USB 2.0 PASSTHROUGH

The main feature of the RX3-100 is the 3 device ports, which are capable of USB 2.0 pass-through, which offers not only KVM functionality for extension of a keyboard/mouse or touchscreen, but also full data transfer capabilities of 300Mbps for 4K UHD webcams and high-speed data drives.

AUDIO DE-EMBED AND PASSTHROUGH

The RX3-100 offers both audio de-embed from the source HDMI and independent audio pass-through lane from line-in audio from the TX simultaneously.

 

BIDRECTIONAL CONTROL & POH

The RX-100 boasts bidirectional PoH, which can power or be powered by a transmitters such as the SW-120-TX3-Ux or SW-120-TX3, while also passing bidirectional RS-232 control to either the display or back to the head-end. If RS-232 isn’t an option, it also supports CEC signals from the transmitter