4K HDBaseT Receiver with USB & Local Inputs

$1,400.00

SKU: SW-515-RX

Powerful, next generation HDBaseT receiver compatible with WyreStorm’s presentation switcher platform, perfect for corporate meeting and classroom environments. Automatically switches between a remote source sent over HDBaseT and 2 local HDMI sources, all with USB device extension. CEC triggering and 3rd party device relays further contribute to a superior and autonomous presentation experience.

WyreStorm Presentation Switcher SW-510-TX (16)          

Technical Specification

AUDIO & VIDEO

Inputs

2x HDMI In: 19-pin type A
1x HDBT In: 8-pin RJ-45 Female

Outputs

1x HDMI Out: 19-pin type A
1x Audio Out: 3-pin Phoenix
1x Line Out: 3.5mm (1/8in) TRS Stereo

Video Encoding

HDBaseT™ Class C

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (micro seconds)

Audio Formats

2ch Analog/PCM | Multichannel: LPCM

Video Resolution (Max)

1920x1080p @60Hz 8bit
1920x1200p @60Hz 8bit
3840x2160p @30Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:2:0

Supported Standards

DCI | RGB

Maximum Pixel Clock

297MHz

COMMUNICATION & CONTROL

HDMI

HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

HDBaseT

HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB

RS-232

1x RS-232 (Control): 3-pin Phoenix | 1x RS-232 (Passthrough): 3-pin Phoenix

Ethernet

2x 8-pin RJ-45 female | Bidirectional over HDBaseT™

IR

1x IR TX: 3.5mm (1/8in) TS Mono

Relays

1x Screen UP: 3-pin Phoenix | 1x Screen DWN: 3-pin Phoenix

USB

2x USB Host: USB-B | 3x USB Device: USB-A

POWER

Power Supply

12V DC 2A

Max Power Consumption

16.25W

Features

  • HDBaseT receiver with switching inputs for education or corporate meeting rooms
  • Automatic or manual switching between a remote HDBaseT source or 2 local HDMI’s
  • Bidirectional USB2.0 for connection of webcams, smart touchscreens and microphones
  • Automatic or manual CEC triggering for compatible connected screens or projectors
  • Condition based relays triggered on source presence
  • Supports source content up to 4K/60 4:2:0 with HDCP 2.2
Additional Features

4-INPUT SWITCHING RECEIVER

A flagship in our PRO range and a first for our Synergy switchers, the SW-515-RX brings features of the H2 and PRO products into one powerful meeting space solution. Supporting USB routing to both inputs, this extender accepts HDMI and USB3.1c sources. Proudly carrying the H2 moniker, it will support 4K content and even HDCP2.2 protected content.

ADDITIONAL RECEIVER INPUTS

When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.

CONDITION-BASED RELAYS BUILT INTO RX

With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.

 

USB 2.0 PASS-THROUGH

HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.