Name: 3-Input In-wall HDBaseT Transmitter (2-gang UK)
Brand: WYRESTORM
SKU: SW-130-TX-UK
Availability: InStock

Technical Specification
Additional Features

Technical Specification

TRANSMISSION

Transmission Encoding

HDBaseT Class C | PAM16 Encoding

End to End Latency

10µs

Max. Transmission Bit Rate

10.2Gbps

VIDEO

HDMI

(v2.0b) TMDS | 340MHz Maximum

Inputs

2x HDMI In: 19-pin type A1x USB-C In: USB 3.1c Audio/Video (4.5Gbps)

Outputs

1x HDBT out: 8-pin RJ45

Max Pixel Clock

HDMI & HDBaseT: 340MHz

Video Resolution (Max)

1920x1080p @60Hz
2560x1440p @60Hz
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @30Hz 10bit 4:2:0 HDR
3840x2160p @30Hz 12bit 4:2:2 HDR
5120×1440 @30Hz
5120×1440 @60Hz 4:2:0

Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

AUDIO

Inputs

1x Audio In: 3.5mm (1/8in) TRS Stereo
2ch audio over HDBaseT | 1-way to RX

Audio Formats

2ch PCM | Multichannel up to DTS-X and Dolby Atmos

Maximum Sampling Rate

192KHz

Maximum Audio Channels

Audio Return Channel (ARC)

Not Supported

COMMUNICATION & CONTROL

USB Host (HDMI Inputs)

1x Type B host | Maximum data throughput: 190Mbps

HDMI

Alt-mode Supported | A/V and USB data from RX

USB 3.1c

RS-232

1x RS-232: 4-pin Phoenix | Shared with 12v DC input
Compatible with WyreStorm TS-280 touchscreen via 4-pin phoenix port (only when using PoH)

HDCP

Pass-Through, 2.3 Supported

EDID

Pass-Through, from RX

Consumer Electronics Control (CEC)

One-way display trigger to RX

Auto Low Latency Mode (ALLM)

Supported

Variable Refresh Rate (VRR)

Supported

POWER

Power Supply

12V DC 1A (not included)

Max Power Consumption

7.8W

Power-over-HDBaseT (PoH)

Supported, 1-way from RX

Local Power Supply Input

4-pin Phoenix

Features

HDBaseT switcher/transmitter for video conference or meeting rooms
Compatible with DVI-I and DP++ v1.3 signals from supported devices
Additional 2ch analogue audio input for sending separate stereo audio to RX
Automatic or manual CEC triggering for compatible connected screens or projectors
Primary power supply via PoH from a supported receiving device (RX-700)
Additional power input via DC port on rear via 12v 1A PSU (not included). Port shared with RS-232 input
Control options include automatic switching, manual switching & CEC trigger and RS-232 control
Compatible with TS-280 touchscreen for control with 12v power outlet

Additional Features

3-INPUT SWITCHING TRANSMITTER

Setting a new standard for in-wall HDBaseT transmission, the SW-130-TX-US brings features of the WyreStorm range of professional switchers and packs them into a 2-gang form factor. Automatic or manual switching of the 3 connected sources (2 HDMI and USB-C) is possible with the USB-C supporting alt-mode functionality allowing a portable device such as a tablet or phone to be connected and send its content at up to 4K/30. HDCP 2.2 is also supported for the transmission of encrypted content.

FEATURES TURNED UP TO 11

It’s not all about the A/V when it comes to HDBaseT; with increased functionality on all fronts, the SW-130-TX can be used to send power triggers to a compatible connected screen, allowing centralized control and is PoH compatible meaning it can be passively powered over HDBaseT from a compatible receiver. The SW-130-TX can even power & charge a phone or tablet connected to the USB-C port so you don’t run out of juice mid-flow (max. 5v 2A)

HDCP 2.2 COMPATIBLE

The industry’s latest encryption standard designed to stop the illegal copying & distribution of 4K UHD content; no longer unique to residential solutions WyreStorm presentation switchers are fully compliant with HDCP 2.2, enabling you to de-centralize source devices within an installation.

USB 2.0 PASS-THROUGH

HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. The SW-130-TX has a USB host port allowing USB device data to be routed into the selected laptop (via HDMI). Going further, it can send USB device data natively through the USB-C port allowing a single cable to be used for A/V and USB device connectivity.