Name: 4-Input 4K HDBaseT Switcher with USB
Brand: WYRESTORM
SKU: SW-510-TX
Availability: InStock

Technical Specification
Additional Features

Technical Specification

AUDIO & VIDEO

Inputs

1x USB-C IN: DP Alt Mode
1x VGA In: 15-pin VGA
1x Display Port In: DisplayPort 1.3
1x HDMI In: 19-pin type A
1x Audio In: 3.5mm (1/8in) TRS Stereo
1x Line In: 3.5mm (1/8in) TRS Stereo

Outputs

1x HDMI Out: 19-pin type A
1x HDBT Out: 8-pin RJ-45 Female

Video Encoding

HDBaseT™ Class C

Audio Formats

2ch Analog/PCM | Multichannel: LPCM

Video Resolution (Max)

1920x1080p @60Hz 8bit
1920x1200p @60Hz 8bit
3840x2160p @60Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:2:0

Supported Standards

DCI | RGB

Maximum Pixel Clock

297MHz

COMMUNICATION & CONTROL

HDMI

HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

HDBaseT

RS-232

1x RS-232 (Control): 3-pin Phoenix | 1x RS-232 (Passthrough): 3-pin Phoenix

Ethernet

2x 8-pin RJ-45 female | Bidirectional over HDBaseT™

1x IR RX: 3.5mm (1/8in) TS Mono

USB

1x USB-C: USB 3.1 Audio/Video
2x USB Host: USB-B
3x USB Device: USB-A

POWER

Power Supply

12V DC 2A

Max Power Consumption

14.02W

Features

Professional switching transmitter for education or corporate meeting rooms
Automatic or manual switching between HDMI, VGA, DisplayPort and USB-C inputs
Bidirectional USB2.0 for connection of webcams, smart touchscreens and microphones
USB-C input supports Alt-mode functionality for AV and USB device connection through a single cable
Automatic or manual CEC triggering for compatible connected screens or projectors
Supports source content up to 4K/60 4:2:0 with HDCP 2.2

Additional Features

4-INPUT SWITCHING EXTENDER

A flagship in our PRO range and a first for our switching extenders, the SW-510-TX brings a wide range of premium features into one powerful meeting space solution. Supporting USB routing to both HDMI and DP inputs, this extender accepts HDMI, DisplayPort and USB3.1c sources with a VGA +audio input for legacy devices. Additionally, the SW-510-TX adds support for 4K content and HDCP 2.2 protected content.

ADDITIONAL RECEIVER INPUTS

When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.

CONDITION-BASED RELAYS BUILT INTO RX

With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.

USB 2.0 PASS-THROUGH

HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.